The headlights on your car are one of the most important safety features. They allow you to see at night and enable other drivers in Aurora, CO to see you coming. But they can also become very dirty over time. You may notice that driving at night becomes more difficult because of this, which is why it's so important to learn how to clean them yourself! It's not as hard as you might think.
DIY headlight restoration involves removing the filth from your lenses and then polishing them back to a shine. There are several products that you can use to restore the luster to your headlights. Before you find one, however, be sure that it's safe for plastic parts!
First, remove the filth from your headlights. You can do this with 2000 grit sandpaper. Be sure not to scratch the lenses because that will make them harder to polish later on. If you don't have sandpaper, you can use a wire brush instead. This will not be very effective, though, so you'll have to work extra hard to remove all of the dirt and grime!
If your headlights are severely oxidized, many people find that retr0bright works well for removing this yellowing. You can do this by mixing hydrogen peroxide with a baking soda paste. Apply it to your headlights and allow it to sit for 30 minutes. Rinse it off with warm water, dry the lenses completely, and you should be good to go!